CV Drive Axle
CV Drive Axle
Your vehicle’s axle connects two wheels together in front and in back. This load-bearing component acts like a central shaft, maintaining the wheel positions relative to each other and to the vehicle body. The axle construction matches vehicle use; trucks and off-road vehicles come with axles that keep the wheel positions steady under heavy stress (ideal for supporting heavy loads), while conventional axles satisfy general consumer needs. No matter what you drive, remember that your vehicle’s axle must bear the weight of your vehicle (plus any cargo) along with the acceleration forces between you and the ground. When it comes to axle inspection, we are your source for professional, knowledgeable service. Bring your car to us and rest assured that the equipment that carries you and your family is safe and secure.
Here is a brief description of the most common axle design:
Simply put, the engine drives the axle. Typically found in front wheel drive vehicles, a drive axle is split between two half axles with differential and universal joints between them. Each half axle connects to the wheel by a third joint—the constant velocity (CV) joint—that allows the wheels to move freely. This joint allows the shaft to rotate, transmitting power at a constant speed without a significant increase in friction and heat. CV joints require regular inspection.
Check your axles: Go out to a large space (such as a parking lot), and slowly drive in tight circles. If you hear a clicking or cracking noise, you have a worn joint, and it must be repaired immediately.
Call or send us an email. We’ll have you back on the road, “click-free” in no time.
Hours of Operation
Monday: 7:30am • 5:00pm
Tuesday: 7:30am • 5:00pm
Wednesday: 7:30am • 5:00pm
Thursday: 7:30am • 5:00pm
Friday: 7:30am • 5:00pm